FREE STANDARD US SHIPPING SITE WIDE [excludes Hawaii and Alaska]

Working In Muddy Conditions And The Equipment Required

stuck in mud

The oil and gas industry comes with rewards and challenges in equal measure. As the wells deepen, workers have to deal with cold environment and muddy terrain with higher risks of slips and falls. Working in open fields can be tiresome if you have to bear high temperatures on sunny days and muddy terrain on rainy seasons. The complicated settings of the oil companies come with increased risks of trapping workers when they fall off the working platforms.

While there could be sufficient facilities to improve safety for the workers, it is impossible to wish away the possible incidents that come with slippery conditions. In other areas, muddy conditions may come from leaking pipes and construction projects that make it hard for people and moving trucks to navigate the working stations. In an industry that faces increasing demand for the products, you cannot stop production to suit the weather changes. However, protective equipment comes in handy towards improving workers safety and comfort for the workers.

When it comes to buying protective gear, everyone is keen on meeting the industry requirements and getting the best out of their budget. It explains why most players analyze quotes from different stores before setting for the best that meets their needs. With oil and gas safety, supplies you are rest assured of high quality yet affordable PPE for oil and gas workers. Whether you need PPE for offshore or onshore rigs, the company offers a full range brands that suit the purpose and the budget. Some of the safety gear required for working in muddy conditions includes:

Helly Hansen FR Rain Coat

A look at the working hours in the oil and gas industry highlights long shifts and durations taken from one team to the other. In normal conditions, workers take 7-16 days in the offshore rigs before another team joins the drilling. Slippery conditions and muddy terrain lowers productivity and hence the need for redesigning the shifts to prevent fatigue.

On the other hand, mud is likely to splash on the workers clothes while exposing them to low temperatures. For this reason, Helly Hansen FR Rain Coat gives adequate shield against water, mildew, and oil among other components. The PVC coat is made up of 100% polyester that provides both flame and heat resistance. To enhance comfort, it comes with draw cord adjustment, push button adjustment, and no shoulder seams.

Working boots

High-quality working boots are vital for a safe working environment. With the bulk of oil drilling involving excavation work, wet conditions remain perfect ingredient for onsite falls and the injuries forthwith. It starts with the fabric to the sole traction to enhance both comfort and working stability. Waterproof and flame resistance goes a long way in a sector that is known for spillages and explosions. Some of the most suitable brands include Ariat, Thorogood, Dunlop, Matterhorn, Twisted X and Much among others. Also, you may consider blister protection, steel socks, boot dryers, and Sno-Seal Waterproofer.

FR reflective Rain Bib Overalls

It is common to find moving trucks, forklifts, scissor lifts, and cranes in the oil and gas companies. Most of these automotive use designated pathways crossing areas meant for human traffic hence posing risks of accidents. It becomes even riskier when the movements occur at night or in poorly lit corners, hence, the need for reflective gear that not only improves visibility but also comfort when working in muddy conditions.

FR Reflective rain bib overalls provide 100% waterproof protection and flame resistance. The fluorescent background in the fabric and the two silver reflective tapes gives both day and night visibility, with the hook and loop suspenders ensuring fast release for comfort. The presence of the take-up straps allows adjustability while eliminating the need for varying sizes.

Retractable Web Lanyard

While water and oil are not typical products, increased excavation works increase the possibility of finding water in the wells. Adequate drainage systems serve to prevent the possibility of contamination, but do little to prevent muddy working stations. While the working boots are a great addition to your team, residual mud is likely to cause falls when the operators are climbing metallic ladders and platforms. A retractable web lanyard is a great tool for those working in hanging terrain as it holds one when a slip occurs.

The Lanyard is made to hold about 310 lbs with fast and easy installation to increase adoption. The equipment is not only ANSI certified but needs no factory recertification keeping you at bay with the legal tussles. The polyester webbing on the gear offers chemical resistance and extra suspension for more weight.

Half mask respirator

Other than slips and falls, workers in the oil rigs have to deal with limited working space and poorly lit wells. Every job requires prior atmosphere analysis to determine the safety of the working environment to prevent incidences. While it might be safe to work in the well, weather aspects such as humidity and heat are likely to change over the course of the shift. It calls for high-quality Mask Respirators to mitigate against the risks of a fluctuating environment.

Half mask respirator features a head harness and unique face piece that blends with other PPE without causing discomfort. It is possible to remove the respirator without interfering with the headgear thanks to the flexible drop down position. The latex free material lowers the risk of irritation on the face of the user.

MSA Standard Harness

Establishing a safe working environment seems to have taken over in the oil and gas industry. Most companies make massive investments in the factories and drilling stations to prevent issues that would raise the need for compensations. With a large focus on fall prevention and protection against explosions, it might be time for these firms to enhance safety beyond the basics.

The nature of the products and the terrain demands extra protection for operators working in suspended stations. Increased moisture, oil spillages, and mud are common causes or onsite falls that can be eliminated through MSA Standard Harness. The gear features a holding capacity of about 400 lbs, yellow polyester, and web retainer colors to provide sufficient support and visibility.

MSA skull guards hard hat-Cap style

Regardless of the type of the incident, injuries are not unique to a given part of the body. For this reason, one needs to adopt a comprehensive safety strategy that lowers workplace hazards and provides adequate cover to the workers, in the event of an accident. Working in muddy conditions translates to slow response to emergencies exposing the crew to falling objects, fire explosions, and faulty equipment.

MSA skull guard hard hat gives ample protection against falling objects, sharp objects, and hard surfaces in case of a fall. The hat features fiberglass material that can withstand heat loads not surpassing 3500 degrees F. the lightweight hard hat meets all ANSI requirements for this category with the Fas-Trac Suspension ensuring comfort.

Shock Absorber Lanyard

With numerous suppliers in the oil and gas market, it seems easy to sail through the process of procuring PPE for the workers. However, many fail to realize the quality requirements that each needs to provide the necessary protection. Other than being slippery, muddy conditions may not be suitable for keeping working tools. Some create raised platforms to prevent contact with mud and cold water.

The Shock Absorber Lanyard remains one of the most reliable Lanyards developed to enhance safety. The 6 feet long, gear comes with double locking snap hooks that are not only resistant to chemicals but also convenient for inspection. The metal hooks and wear pad improves strength and durability.


Michael Snyder
Michael Snyder

Author